WRAG Commander XL Series Hydraulic Post Drivers -- Iowa Farm Equipment

WRAG 'Commander XL300' Series Hydraulic Post Drivers
Loaded With The Best Features, Plus Double Offset Articulation & Positioning!
(Available as Skid Steer Quick Attach)

‘Commander XL300’ Centered, Telescoping Retracted, Tilted Forward w/Rock Spike With the 90° Swing, Telescoping Boom, Left & Right Carrier Slide for Offset Positioning, & Hydraulic Center Leg Adjustment, 4-Way Tilt, Driving Straight Posts on the Fence Center-Line is Efficient & Hassle Free, Eliminating the Need for (Repeatedly) Repositioning your Tractor for Precise Positioning. The 110,000lb’s of Hammering Force also Contributes to Efficiency & Straight Posts, Even in the Toughest Ground Conditions. For the Worst Ground Conditions, an Optional Rock Spike is available - WRAG Drivers include the Extra Spool Valve & Mounting Lugs (for the Rock Spike & Extractor) as Standard Features. The 'Commander Basic XL300’ Driver includes the following Standard Features: Hydraulic Mast Positioning: 90° Swing, from Rear Center to Right, Infinite Positioning. Telescopic Boom, Horizontal, up to 16” w/Infinite Positioning. Functional Anywhere in the 90° Swing. 3-Point Left & Right Carrier Slide w/Infinite Positioning. 'Front to Rear' & 'Left to Right' Tilt! Hydraulic Center Leg Adjustment. Open Frame Design: Provides maximum efficiency, versatility & flexibility, on any terrain, for positioning the Post to be as straight as possible! Allows adding new posts into existing fence lines without contacting & damaging the existing fence wires! Allows Driving Posts as Low as 6” Above Grade! Self-Contained Hydraulic System: Eliminates the clumsy & costly Return Line Kit (a nuisance to add & remove & route to the reservoir filler neck)! Eliminates the risk of discharging hydraulic oil all over the back of Tractor (from the Return Line Kit)! Without the need of a model specific Return Line Kit, this Driver is universal to use on any make & model of Tractor! 110,000lb's of (Springless) Drop Hammer Pounding Force: The Drop Hammer System provides Springless Driving Energy, eliminating daily maintenance (seasoning), and the potential disruption & expense associated with Spring failures! WRAG’s Drop Hammer System uses an Industrial Poly & Cotton Braided Rope, which is very easy on your hands & won’t kink, or fray, offering a trouble free service life! Hinged 'Arm' for the Drop Hammer Operation: Hinged 'Arms' are superior to Hinged ‘Masts’, which are a nuisance to set-up, require more pulleys & increases maintenance, and contributes to a loss of driving force! Flow Control Valve: Used to reduce the Hinged Arm cycle time for smoother operation, or to speed it up for faster operation (once you’re able to throttle & feather the controls)! Controls Located for Maximum Safety & Ergonomic Convenience!
‘Commander XL300’ Centered, Telescoping Retracted, w/Rock Spike & Extractor	'Commander XL300’ Centered, Telescoping Retracted, Tilted Forward w/Rock Spike & Extractor.
‘Commander XL300’ 90° Swing & Right Offset w/Rock Spike	‘Commander XL300’ 90° Swing & Offset w/Rock Spike
‘Commander XL300’ Centered, w/Rock Spike
'Commander XL300’ 3-Point Carrier Slide, Right Offset	‘Commander XL300’ Centered, Tilted Forward w/Rock Spike
‘Commander XL300’ w/Rock Spike	‘Commander XL300’ w/Rock Spike
‘Commander XL300’ 3-Point Hitch & Carrier Slide Centered	‘Commander XL300’ 3-Point Hitch & Carrier Slide Centered
‘Commander XL300’ 3-Point Hitch Carrier Slide, Left Offset	'Commander XL300' 3-Point Hitch Carrier Slide Centered
‘Commander XL300’ Driver Optional Rock Spike & Extractor.	‘Commander XL300’ Driver Optional Rock Spike & Extractor.
‘Commander XL300’ Driver Optional Wire Unroller.

'COMMANDER XL300' 3-POINT POST DRIVER
Max. Post Length w/36" Legs Fully Extended	9'-0" Post (Drives down to 30" Above Grade)
Max. Post Length w/Legs Fully Retracted	8'-0" Post (Drives down to 18" Above Grade)
Max. Post Diameter	10"
Drop Hammer Weight	660 lbs.
Driving Force	110,000 lbs. @ Full Stroke
Mast Length	10'-8" w/Legs Retracted
Hydraulic Tilt	22° Left & Right, Front & Rear
Hydraulic Swing	90° (Infinite Positioning)
Hydraulic Telescoping	15" Travel for Offset Positioning (Infinite Positioning)
Hydraulic 3-Point Carrier Positioning	16" Left to Right Travel for Offset Positioning From Center Position: 8" to Left, 8" to Right (Infinite Positioning)
Hydraulic Requirement	Min 12GPM/1800PSI
Hydraulic Systems	Open Center (Plugs for Closed & Load Sensing Available)
Weight	2,150 lbs.
3-Point Hitch	Double Clevis, CAT 2 (Not Quick Hitch Compatible) Requires Minimum 65HP Tractor!

Specifications & Designs Are Subject to Change Without Notice